cold-peel-matte-heat-transfer-printing-effect

Step 1: Preparing Heat Transfer Materials

Before heat transfer printing, we need to prepare some relevant heat transfer materials and machines. They are as below:

  • Cold Peel Heat Transfer Film.

  • Water-Based High-elastic Heat Transfer Ink.

  • Water Based Hot Melt Glue.

  • Hot Melt Powder.

  • Heat Press Machine / Heating machine.

Step 2 : Heat Transfer Printing Process

There are several printing processes, which layer is printed first, which kind of material is printed on the top, please see our images and steps as below:

heat transfer printing layers display
  • 1 Print the color ink on the PET film with release agent by silk screen printing.

  • 2 Print the water based white ink W910 twice by about 32T-48T silk screen mesh when the color ink is surface dry.

  • 3 Print the water based clear ink W900 once by about 32T-48T silk screen mesh when the white ink is surface dry. (If the washing water requirement is not high, this step can be omitted)

  • 4 Print the water based anti-sublimation black ink W950 once by about 32T-48T silk screen mesh when the white or clear ink is surface dry. (If you don’t transfer to black fabrics, this step can be omitted)

  • 5 Print the water based clear ink W900 once by about 32T-48T silk screen mesh after the anti-sublimation black ink W950 (If the washing water requirement is not high, this step can be omitted)

  • 6 Print the water based glue W32 above twice by 32T-40T silk screen when the white ink is surface dry.

Step 3 : Notes

  • 1 The transfer printing PET film must dry in the air at least 8 hours and then can be transferred to T-shirts after printing the glue. Also you can bake the transfer printing PET film for 15-20 minutes under 40-60 centigrade degree after printing the glue.

  • 2 It does not test the washing resistance and elastic until 1-2 hours after transfer by heat press.

  • 3 Cold peeling film: Transfer temperature: 130-150 centigrade degree

    Transfer time: 8-15s

    Transfer pressure: 3-4 kg

  • 4 In order to increase the fastness of washing water, 2% curing agent can be added to W910 and W900.

Leave A Comment